Stratos2 Demo Setup Alpha - with Open Stack

This blog post is going to explain how to setup the Stratos2 Demo Setup in VirtualBox

first you have to download our image from here (This will take some time because of the size 17.3GB)
Now double click on it to install.
Once you done with the installation you have to go to configure the "virtual host only interface" with following details
1. go to file->preferences in VirtualBox
2. Select Network tab and add new "Host only network"


IPV4 address: 172.14.0.254
IPV4 network mask :255.255.0.0


3. Now start this image and login to the Instance
[sourcecode language="bash"]
username: wso2
password: g
[/sourcecode]







4. Go to /demo_setup/conf/ and view setup.conf



If you have any changes in configuration according to your environment you can do it in setup.conf

5. Move to demo_setup folder and type "sudo bash" to move to root and run the setup-demo.sh
Press enter when the following questions are coming

================================================================================
[sourcecode language="bash"]
Enter new UNIX password:
Retype new UNIX password:
No password supplied
Enter new UNIX password:
Retype new UNIX password:
No password supplied
Enter new UNIX password:
Retype new UNIX password:
No password supplied
passwd: Authentication token manipulation error
passwd: password unchanged
Try again? [y/N] N

Changing the user information for git
Enter the new value, or press ENTER for the default
Full Name []:
Room Number []:
Work Phone []:
Home Phone []:
Other []:
Is the information correct? [Y/n] Y
do ssh-keygen without password for git user. press enter to continue...

Generating public/private rsa key pair.
Enter file in which to save the key (/home/git/.ssh/id_rsa):
Created directory '/home/git/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/git/.ssh/id_rsa.
Your public key has been saved in /home/git/.ssh/id_rsa.pub.
The key fingerprint is:
83:55:ac:2b:ae:6d:4a:58:98:b9:11:46:2a:7d:cf:f5 git@s2demo
The key's randomart image is:
+--[ RSA 2048]----+
| . .. |
| + .. |
|o + . o. |
|.. * o +.. |
| = . + S.E |
| = . .. |
| o .. . |
| . .o |
| o+. |
+-----------------+
Reading package lists... Done
Building dependency tree
Reading state information... Done
git is already the newest version.
gitolite is already the newest version.
gitweb is already the newest version.
apache2 is already the newest version.
bind9 is already the newest version.
apache2-suexec is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 56 not upgraded.
Adding entries to gitolite... Please do :wq after gitolite.rc file open. Press enter to continue...

The default settings in the rc file (/home/git/.gitolite.rc) are fine for most
people but if you wish to make any changes, you can do so now.

hit enter...
[/sourcecode]
================================================================================

Once you reached here, it will open the file with details then you have to save the file by doing the ":wq" command


Again you can see the following commands in console - just press enter to proceed
================================================================================
[sourcecode language="bash"]
creating gitolite-admin...
Initialized empty Git repository in /home/git/repositories/gitolite-admin.git/
creating testing...
Initialized empty Git repository in /home/git/repositories/testing.git/
[master (root-commit) 390bc9e] start
2 files changed, 6 insertions(+)
create mode 100644 conf/gitolite.conf
create mode 100644 keydir/git.pub
Cloning into 'gitolite-admin'...
Warning: Permanently added 'localhost' (ECDSA) to the list of known hosts.
remote: Counting objects: 6, done.
remote: Compressing objects: 100% (4/4), done.
Receiving objects: 100% (6/6), 709 bytes, done.
remote: Total 6 (delta 0), reused 0 (delta 0)
do ssh-keygen without password for wso2 user. press enter to continue...
Generating public/private rsa key pair.
Enter file in which to save the key (/home/wso2/.ssh/id_rsa):
/home/wso2/.ssh/id_rsa already exists.
Overwrite (y/n)? y

Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /home/wso2/.ssh/id_rsa.
Your public key has been saved in /home/wso2/.ssh/id_rsa.pub.
The key fingerprint is:
03:80:76:55:c0:ea:9f:04:3c:e9:38:d8:bd:9e:09:11 wso2@s2demo
The key's randomart image is:
+--[ RSA 2048]----+
| ..ooo. |
| o ... |
| .Eo o. |
| .* . |
| o.= o S |
|. +.+ . . |
| .. + . |
| ..oo |
| .+ |
+-----------------+
[master a6087aa] Check in by git
3 files changed, 10 insertions(+), 4 deletions(-)
create mode 100644 conf/repos/testing.conf
create mode 100644 keydir/wso2.pub
Already up-to-date.
Counting objects: 12, done.
Compressing objects: 100% (7/7), done.
Writing objects: 100% (8/8), 927 bytes, done.
Total 8 (delta 0), reused 0 (delta 0)
remote: creating testingt...
remote: Initialized empty Git repository in /home/git/repositories/testingt.git/
To git@localhost:gitolite-admin
390bc9e..a6087aa master -> master
Cloning into 'gitolite-admin'...
remote: Counting objects: 14, done.
remote: Compressing objects: 100% (11/11), done.
Receiving objects: 100% (14/14), 1.57 KiB, done.
remote: Total 14 (delta 0), reused 0 (delta 0)
ln: failed to create symbolic link `/etc/apache2/mods-enabled/appfactory.load': File exists
-D AP_DOC_ROOT="/var/www"
-D AP_GID_MIN=100
-D AP_HTTPD_USER="www-data"
-D AP_LOG_EXEC="/var/log/apache2/suexec.log"
-D AP_SAFE_PATH="/usr/local/bin:/usr/bin:/bin"
-D AP_UID_MIN=100
-D AP_USERDIR_SUFFIX="public_html"
ln: failed to create symbolic link `/etc/apache2/mods-enabled/suexec.load': File exists
ln: failed to create symbolic link `/etc/apache2/sites-enabled/git': File exists
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
httpd (no pid file) not running
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
/opt/ADC ~/demo_setup
~/demo_setup
/opt/cloud_controller ~/demo_setup
In repository/conf/carbon.xml
rm: cannot remove `./repository/conf/service-topology.conf': No such file or directory
rm: cannot remove `./repository/conf/service-topology.conf.back': No such file or directory
~/demo_setup
/opt/wso2mb-2.0.1 ~/demo_setup
~/demo_setup
/opt/elb ~/demo_setup
~/demo_setup
/opt/agent ~/demo_setup
~/demo_setup
/opt/wso2is-4.0.0 ~/demo_setup
~/demo_setup

Import the wso2.pub into openstack (With the same name mentioned in /opt/cloud_controller/repository/deployment/server/cartridges/)
cat /home/wso2/wso2.pub.
Cut and paste the output into the box that you get when execute import keys of the openstack dashboard
When you are ready press any key to continue starting servers
[/sourcecode]
================================================================================
once you come here in the command line you have to take another console and login to the VM as follows
[sourcecode language="bash"]
ssh wso2@172.14.0.1
password : g
[/sourcecode]


then follow this command to view the public key
cat /home/wso2/wso2.pub and copy the public key


Then open the OpenStack buy using the IP address http://172.14.0.1/

[sourcecode language="bash"]
username : admin
password : openstack
[/sourcecode]


Go to Project -> Access and Security then go to section Key Pairs 


Delete the already exist "stratos-demo" key and import it again


once you finish this again you can go to earlier command line and press enter to start servers


when it finished you can see the command line as follows


Now the stratos demo environment ready for use

6. Go to https://172.14.0.1:9445/carbon/admin/login.jsp
[sourcecode language="bash"]
username : admin
password : admin
[/sourcecode]


Create new tenant with following details

Domain : stratos.com
FirstName : statos2
LastName : alpha
Admin Username : dinuka
Password : dinuka123
Email : dinukam@wso2.com


Now we are done with the Stratos2 Demo Setup